Selection Table; Installation Guidelines - ABB ACSM1 Hardware Manual

88

Selection table

Mains filters for ACSM1-04
Drive type
ACSM1-04xx...
The mains filters are protected to IP20. Refer to page
and tightening torques.

Installation guidelines

• If a mains choke is also installed, the mains filter is connected between the mains
choke and the drive module. See the diagram below.
• For optimal operation of the filter, the drive and the filter must be mounted on the
same conductive surface
• Ensure the filter does not block the airflow through the drive module
• Keep the cable between the drive and the filter as short as possible.
Mains filters
Filter type
-02A5-4
-03A0-4
-04A0-4 JFI-02
-05A0-4
-07A0-4
-09A5-4
-012A-4 JFI-03
-016A-4
-024A-4
-031A-4
JFI-05
-040A-4
-046A-4
-060A-4
-073A-4 JFI-07
-090A-4
PDM-425726
106 for dimensions, wire sizes