LG LDV-S802 Owner's Manual page 68

[3] ALARM/SENSOR SETUP
a Alarm mode (Alarm relay out select)
Select the event type by using the arrow keys to set the signal transmission for alarm output.
Note
Event selecting...!
- OFF : No alarm relay out.
- SENSOR : Alarm relay out by sensor trigger.
- MOTION : Alarm relay out by motion detection.
- SENSOR + MOTION : Alarm relay out by either motion detection or sensor trigger.
b Alarm dwell time
Configure the duration of the alarm. (0 sec ~ 30 minutes)
c Event record
Set whether to record or not and the recording time when an event occurs. (OFF ~ 30minutes)
d Sensor type
Set connection status of the sensor input.
- N.O (Normal open): The contact is normally opened but closed when the signal is generated.
- N.C. (Normal close): The contact is normally closed but opened when the signal is generated.
68
a
b
c
d