Auto Sequence - LG LDV-S802 Owner's Manual

Auto Sequence

a
c
d
Auto sequencing is the sequential screen display for the effective monitoring. Press the SEQ button to use.
a AUTO LOSS SKIP
It is to set up to skip the channel when there is the no camera input.
b SEQUENCE MODE
It is to set up whether to show the channel as a sequence mode.
- FULL: It shows the full screen sequentially.
- PIP: It shows the PIP image sequentially.
c PIP SEQUENCE
In case of No. 2, if the setup is FULL, it will show each channel in full sequencing but, if it is setup as PIP,
another small image channel will be shown on the full screen channel. You can set which of them to be set
in sequence from either the full screen channel or the small screen in here.
- PIP: If you select PIP, the small screen channel shows in sequence. The main screen remains the same.
- Main: If you select the main, the PIP window remains unchanged but main screen is displayed in
sequence.
Note
PIP (Picture In Picture) : It means you can see the another small picture on the screen. It is similar to the
multi-vision.
d Display time
It is to set up the hang on time while sequencing the channel. The user can extend the hang on time of a
specific channel.
- Channel hang on time: OFF or, 01 ~ 30 seconds.
b
37