Using The Pocket Pc As A Usb Host Device; Configuring Device Settings - Fujitsu LOOX T810 Manual

Using the Pocket PC as a USB Host device

USB data transfer USB Host
You can connect USB devices from Fujitsu Siemens Computers (e.g.
MEMORYBIRD or STORAGEBIRD) immediately.
If you want to connect other USB devices, ask your dealer whether you
will need to install corresponding drivers first.
The current consumption of the USB device must not exceed 100 mA (at
+5 V). USB devices with a current consumption of more than 100 mA must
be supplied with power via their own power supply.
► Select Start – Settings – System – USB mode.
The window for selecting the USB mode pops up.
► Select the USB Host option.
► Confirm with OK.
► Connect the USB Host cable to the mini USB port on the Pocket PC.
► Connect the USB device (such as a MEMORYBIRD) to the USB port of the USB Host cable.
The USB device is now connected to your Pocket PC.
► If the battery charge level of your Pocket PC is low you should connect the mains adapter
(see "Connecting the mains adapter and charging the battery", Page
► When you no longer need to operate the Pocket PC as a USB Host, change
the USB mode back to USB Client.
Configuring device settings
Alarms Configuring device settings Date Time Background image Tones
Detailed information about how to configure device settings such as the date,
time, alarms, background images, tones, and application and task displays
can be found in the help file on your Pocket PC.
A26391-K182-Z120-1-7619, edition 2
With the optional USB Host cable you can
use your Pocket PC as a USB Host device
and connect various USB devices, such as a
MEMORYBIRD, to the Pocket PC.
Operating the Pocket PC
19).
51