Panasonic AU-EVA1 Setup Manual page 6

AU-EVA1 SETUP GUIDE
EVA1 + iOS DIRECT Connection
Wi-Fi Direct enables
devices to easily connect
with each other without
requiring a wireless access
point. This method may be
more convenient depending
on the situation.
6
2: First connect the iOS device to the default camera network: AU-EVA1
The password is 01234567890123456789abcdef
Next, open EVA ROP app.
– Enter IP Address after clicking on settings as shown in the picture.
– Exit MENU on camera and click ok, camera should connect.
– User ID and Password are optional and only needed if one is created and added in camera.
If necessary:
Default User ID: guest (up to 31 characters)
Default Password: auguest (6-15 characters)
1: Take note of the IP address.
This will be needed for iOS setup.
*The IP address may be different for your camera.