Table of Contents
Advertisement
Using Automatic programmes
Select
Automatic programmes
A list of food types will appear in the
display.
Select the type of food.
The Automatic programmes available
for the food type selected will then
appear.
Select the Automatic programme that
you want to use.
Each step you need to take before
starting the Automatic programme will
appear in the display.
In some programmes you will be
prompted on when to add food to the
oven. Follow and confirm these
instructions.
Notes on using these programmes
– The degree of doneness and
browning levels are shown in a bar
chart with seven segments. The
factory default is always the middle
setting. It will be highlighted. To
change the setting, move the
highlighting to the left or the right.
– The weight entry in the Automatic
programmes refers to the weight per
piece. For example, you can cook
just one piece of salmon weighing
250 g or 10 pieces of salmon
weighing 250 g each at the same
time.
– The oven interior needs to be at room
temperature before starting an
Automatic programme.
Automatic programmes
– When placing food in an already hot
oven compartment, be very careful
.
when opening the door. Hot steam
can escape. Step back from the
steam oven and wait until the steam
has dissipated. When putting cooking
containers or the condensate tray
into the oven or taking them out, take
care not to spill the contents. Avoid
contact with hot steam, and do not
touch the hot oven compartment
walls. Danger of burning and
scalding!
– For some Automatic programmes the
start time can be delayed using
at
– To end an Automatic programme
early, you do not need to switch the
steam oven off completely. Touch .
Cancel cooking?
display. If
menu will be shown in the display.
– If by the end of an Automatic
programme the food is not cooked
enough, select
– Automatic programmes can also be
saved as
or
Finish at
.
will appear in the
is selected, the main
Yes
Continue cooking
User programmes
Start
.
.
53
Advertisement
Table of Contents
