Hitachi M300N Service Manual page 38

6. Fully raise latch in the direction indicated in
1
7. Carefully (it may be hot) lift the CPU
8. When re-inserting the CPU, play careful attention to the pin alignment, it will fit only one way (don't force it!).
a.
1
Locked
b.
Figure 9a to unlock the CPU.
up out of the socket (Figure 9b).
2
2
Caution
The heat sink, and
CPU area in general,
contains parts which
are subject to high
temperatures. Allow
the area time to cool
before removing these
parts.
Removing the Processor 2 - 15
Disassembly
Figure 9
Processor Removal
(cont'd)
a. Raise the latch to unlock
the CPU.
b. Lift the CPU out of the
socket.
2. CPU