General Description; General Features - Toshiba MITOS VT6 AIR User Manual

Hide thumbs

Table Of Contents

Table of Contents

MITOS VT6 AIR is a measure, visualization and control device for pressure, velocity and flow. It has got a temperature

sensor (internal) and a differential pressure sensor with two possible range:

+/-999mmH

O +/-1% F.S.

+/-2999mmH

O +/-1% F.S.

The precision of the pressure measurement is optimized by the compensation in function of the temperature. It is

equipped with 6 buttons and 1 LCD 16x2 lines display (2 lines and 16 fonts each line). It is also programmable by a

menu.

The control is done by a VF-S11, VF-FS1, VF-AS1 VF-NC3, VF-MB1, VF-S15 or VF-PS1 Toshiba inverter, using a

simple TTL serial connection (VF-S11 inverter) or RS485 (other inverter) and it can be manual or automatic. The

selection of the type of serial connection can be selected by a dip-switch placed on the back of the box.

Manual control allow to command run/stop and/or the inverter frequency. The frequency sent is fixed and is

programmable from the display menu.

Automatic control commands run/stop and also regulate the frequency sent to the inverter in order to keep the pressure,

velocity or flow (selectable) at a fixed level, programmable from the display menu. Automatic control uses a PID

regulation characterized by proportional, integrative and derivative parameters, changeable from the programming

menu.

MITOS VT6 AIR can also visualize some functioning parameters of the inverter, such as current and power delivered,

input and output voltage, frequency, hours of functioning, historic of the last four alarms.

Available scales for pressure, velocity and flow are:

Pressure: mmH

O; mbar; Pascal; Kpascal.

Velocity: second meter

Flow: hundreds of cube meters per hour; cube meters per second; litres per second.

MITOS VT6 AIR has got the following features

Case:

Alimentation:

Working temperature:

Box dimensions:

Weight:

Input:

User interfaces:

02/10/2015