Operating Features - Kenwood KDS-100 Service Manual

KDS-100
Front panel
1
3
Display
1
Messages appear on this 240 x 64 dot LCD.
LED Indicator (default settings)
2
Lights red while "talking" to the mobile unit. Lights
green while "listening" to the mobile unit. Flashes orange
when a message is waiting.
MENU key
3
Press to enter the Menu mode, in order to select your
desired menu.
Keys 1 ~ 5
4
Press these function keys to perform the functions de-
scribed in the status bar on the display, directly above the
keys.
SEL (Select) key
5
Press to select the displayed item.
▲ key
6
Press to scroll up the display.
7 ▼ key
Press to scroll down the display.
2
OPERATING FEATURES / INSTALLATION
2
4 5
A
CN4
B
CN3
C
D
7
TK-780/880/980/981 Series (TK-
■ Installing the KCT-34 in the Transceiver
1. Remove the upper cover from the transceiver.
2. Lift the DC cord bushing (
3. Remove the pad as shown in the Figure 1 (
4. Insert the KCT-34 cable (
wire harness band (
6
5. Replace the DC cord bushing (
7
6. Connect the KCT-34 to the TX-RX unit (A/2) as shown in
Figure 2 (
7
Connector Wire Color
A-1 Brown
A-2 NC
A-3 NC
A-4 Orange
A-5 Gray
A-6 NC
A-7 Yellow
A-8 Blue
D
C
B
CN1
CN2 A
5
6
Fig. 2
) from the chassis.
1
) into the chassis (
3
) must be inside the chassis.
5
).
6
).
Connector Wire Color
Pin No.
4 B-1
B-2 White
–
B-3 Green
–
C-1 Purple
5
C-2 Light blue
10
– C-3 Light green
D-1
6
D-2 Black
8
D-3
1
2
Fig. 1
4
3
KCT-34
KDS-100 or
1
through KCT-36
3
13
extension cable.
15
80 Series)
*
).
2
). The
4
Pin No.
NC –
11
7
9
14
15
NC –
3
Red 1