Wireless LAN
Wireless frequency
(varies by regulatory
domain)
RF data rates
RF power level
Channels
Security
Cisco compatibility
Bluetooth
Enhanced data rate
Connection
Bluetooth version
Operating Frequency
Default Configuration
The following tables list the default values of the configuration settings supported on
the computer. If you restore the computer to factory default settings, the computer uses
these values.
The settings are grouped by function and reflect the organization of Intermec Settings.
Not all of the configuration settings are listed in this appendix. For detailed information
on most of the settings, see the Intermec Settings Command Reference Manual.
Data Collection Settings
Use data collection settings to configure the Bluetooth or tethered scanner and to con-
figure the bar codes that you want the imager to be able to read.
Data Collection Settings
Data Collection for Tethered Scanner
Setting
Tethered-Configure On Connect
Enable USB Scanner Auto-Detect
Enable Scanner Port
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
2.4 to 2.4895 GHz IEEE 802.11b/802.11g DSSS OFDM
5.15 to 5.82 GHz IEEE 802.11a DSSS OFDM
802.11a (OFDM) 6, 9, 12, 18, 24, 26, 48, 54 Mbps
802.11b (DSSS) 1, 2, 5.5, 11 Mbps
802.11g (OFDM) 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (OFDM 20 MHz chs) 13, 26, 39, 52, 78, 104, 117, 130
Mbps
802.11n (OFDM 40 MHz chs) 27, 54, 81, 108, 162, 216, 243, 270
Mbps
50 mW maximum
FCC: 1 to 11, 36, 40, 44, 48, 149, 153, 157, 161
ETSI: 1 to 13, 36, 40, 44, 48
WPA, WPA2, 802.1x (EAP-TLS, TTLS, LEAP, PEAP, EAP-FAST), WEP
CCX v4 certified
Up to 3.0 Mbit/s over the air
No less than 10 m (32.8 ft) line of sight
2.0 + EDR
2.402 to 2.480 GHz
Default Value
Overwrite with computer
settings
Off
Off
81