Operation
3-6
1.
Perform preoperational procedures
(figure
3-2).
2.
Press WRITE pushbutton.
3.
After desired information has been written,
press STORE pushbutton.
4.
Use HORIZ and VERT POSITION controls
to position trace so that information to be
written will not interfere with information
previously written.
NOTE
Keep write periods short. Each
write period reduces the time
that previously written informa-
tion can be stored.
5.
Press WRITE pushbutton.
6.
Use HORIZ and VERT POSITION controls
to position trace as desired.
7.
Press STORE pushbutton after desired
in-
formation is written.
8.
Repeat this procedure as many times as
desired.
Figure 3-4. Multiple Display Procedure
Model 1331A
1331A-A-4
)