LG L330-DN Owner's Manual page 13

Connections
lens iris output connector
Pin layout for the lens iris output connector.
No.
A
B
C
D
DC type lenses
Damping -
Damping +
Drive +
Drive -
Rewire the lens iris plug
1. Cut off the plug of the lens cable, cut off
approximately 8 mm of the insulation, and then
strip approximately 2 mm of the ends of the cable
sheaths.
2. Solder the ends of the cable wires to the ends of
the pins, and then attach the cover of the lens iris
plug.
13