Menu Operation
6.
Use [UP] or [DOWN] to select an Area Select option
from 1 to 4 then use [LEFT] or [RIGHT] button to adjust
the option.
•
TOP: Moves top position on the screen.
•
BOTTOM: Moves bottom position on the screen.
•
LEFT: Moves left position on the screen.
•
RIGHT: Moves right position on the screen.
Note:
When the TOP and BOTTOM value is the same, the block
wouldn't be shown. And increase the top value, the
bottom value would increase too, you could set it after
fixing the top value. While decrease the bottom value, the
top value would decrease too. LEFT and RIGHT relation is
similar too.
Privacy Setting
This function is aiming at the protection of personal
privacy, selecting a screen part black or other color not to
be displayed in the screen. 4 areas can be registered.
1.
Select [PRIVACY] option.
2.
Use [LEFT] or [RIGHT] button to select a [ON] and press
[SET]. The PRIVACY SETUP menu appears.
3.
Use [LEFT] or [RIGHT] button to select the Area
Selection (1 to 4) on the [AREA SEL].
•
TOP: Moves top position on the screen.
•
BOTTOM: Moves bottom position on the screen.
•
LEFT: Moves left position on the screen.
29