Communication Specifications - Canon WUX450 User Commands

2. Communication Specifications

Communication Specifications
The projector can be controlled via RS-232C or LAN connection.
Item
Connection
system
Connection
signal line
Connection
cable
送信データ Send Data
Receive Data 受信データ
Signal Ground 信号用設置
* Signal lines other than the three SD, RD, and SG lines are not used in the projector.
* Loop back its own signals on the PC side as necessary.
WUX450 / WX520 / WUX400ST / WX450ST User Commands
PC - Projector connection configuration
LAN PORT
Network Connection
ネットワーク接続
PC
COM PORT
PC
RS-232C connection
Specifications
PC and projector connected on
a "1:1" basis
3-line connection of SD,
RD, and SG
9-pin RS-232C Cable (Cross)
SD SD
RD RD
SG SG
LAN PORT
SERVICE
PORT
RS-232C RS-232C
crossover cable
クロスｹｰﾌﾞﾙ
Item
Connection
system
Connection
signal line
Connection
cable
LAN
Send Data 送信データ
Receive Data 受信データ
Signal Ground 信号用設置
- 2 -
プロジェクター
PROJECTOR
LAN connection
Specifications
TCP / IP Connection
Straight when connecting via
network
LAN Cable
1000BASE-T
100BASE-TX
10BASE-T