Temp - Canon WUX450 User Commands

TEMP

Temperature sensor value inquiry
Format
Setting Command
Response
Reference Command
Response
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No Yes Yes
Remarks
(1) There are cases when number of sensors is 0. In this case, there will not be a comma.
Example
Reference
> GET=TEMP
< g:TEMP=6,28.5,53.3,53.3,53.3,33.0,27.6
* Commands are indicated by ">", and responses are indicated by "<".
WUX450 / WX520 / WUX400ST / WX450ST User Commands
-
-
GET=TEMP
g: TEMP=<Number of sensors>,<Sensor 1 value>,...,<Sensor n value>
Note: See "Error list" for any response other than the above.
RS-232C
ST ON D-RGB A-RGB COMP
Yes Yes Yes Yes
- 55 -
Input
HDMI LAN USB
Yes Yes Yes Yes
None
Yes