Attach The Rear Band - Brother AiRScouter WD-370B User Manual

Attach the rear band

1
Press the area highlighted in the
image below, and slide the head
band cover towards the end of the
band to remove it.
2
Slide the loop at one end of the
rear band over the attachment
post as shown in the illustration,
and feed the rear band through the
opening at the end of the head
band.
3
Replace the head band cover as
shown, ensuring that the rear
band is fed through the cut-out on
the end of the cover. Press the
area highlighted in the illustration
and slide the cover back into
place.
4
Repeat Steps 1-3 to attach the other end of the rear band
to the other end of the head band.
21