Hitachi Compute Blade 320 Instruction Manual page 89

7. The following screen appears. Check that the device has been registered in the boot entry.
If multiple devices are to be registered, repeat the steps from 2 to 6.
• • • If multiple devices are registered, the device registered to the entry number 1 becomes the Primary Boot
Tip
device.
8. Press [ESC] key and return to the following window and press [ESC] key again.
9. When the "BIOS Utility" terminates, the following message appears. Press [Y] as shown below. The system unit restarts.
Supplementary Notes on Fibre Channel Adapter Function
7-17