Hitachi Compute Blade 320 Instruction Manual page 92

This chapter describes the LED information of this adapter. "CC2M8G3X1" and "CC9M4G2X1" have not the LED
information.
□
LED indications and actions to be taken
LEDs are attached on the bracket side of this adapter as shown below.
If LED shows any other status than described below, contact your sales representative or
call the maintenance personnel.
No. LED status
Yellow
Green
● ▲4
1
● ▲3
2
● ▲2
3
○
Δ
4
○ ○
5
Legends of LED status: ●: Lighting, ○: Not lighting, ▲ ｘ : Blinking x LED count, Δ:Slow blinking
• • •
For any other LED status than the above, contact the maintenance personnel.
Tip
8-2
RX R
Meaning
Link up at 8 Gbps.
Link up at 4 Gbps.
Link up at 2 Gbps.
Link down status
No current is applied to the adapter.
LED (green)
TX
LED (yellow)
No action is required.
No action is required.
No action is required.
Check the status and cable
connection of the connected devices.
Check the transfer speed setting of
the adapter and the connected
devices.
Turn on the system unit.
LED Information
Action to be taken