4.3.4 Starting or Stopping the Totalizer Measurement
To start or stop totalizer measurements:
TOTAL m^3
Forward
0.000e+00
Reverse
0.000e+00
TOTAL m^3
Forward
0.000e+00
Reverse
0.000e+00
TOTAL m^3
Forward
0.000e+00
Reverse
0.000e+00
AquaTrans™ AT600 User's Manual
From the display, press either the [] or [] keys until the
(either an arrow icon for
After the value is highlighted, press [
The display icon then changes to indicate the new status (
Chapter 4. Initial Setup and Programming
Start
or a two-bar icon for
]
to start or stop totalizing.
Start/Stop
icon
Stop
) is highlighted.
Start
Stop
or
).
37