Troubleshooting; For Your Safety - Panasonic KX-TGA407 Installation Manual

Hide thumbs Also See for KX-TGA407:
Table of Contents

Advertisement

Troubleshooting

Problem
The unit does not work. L When the indicators do not light, the AC adaptor is not
While talking using the
handset, sound cuts in
and out.
The STATUS indicator
continues to flash
green for a while.

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the
product to ensure proper and safe operation of your product.
kWARNING
Power connection
L Use only the power source marked on the product.
L Do not overload power outlets and extension cords. This can result in the risk of fire or electric
shock.
L Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause
electric shock and/or excessive heat resulting in a fire.
L Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power
outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from
moisture, etc. resulting in a fire.
L Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an
unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has
stopped emitting and contact us at http://shop.panasonic.com/support
L Unplug from power outlets and never touch the inside of the product if its casing has been
broken open.
L Never touch the plug with wet hands. Danger of electric shock exists.
For assistance, please visit http://shop.panasonic.com/support
Cause/solution
connected properly. Check the connections.
L When the indicators do not light green, move the unit
closer to the base unit.
L Registration may have been canceled.
Re-register the range extender:
Perform from step 2, "Installation/Registering the
range extender to the base unit", page 3.
L The handset is out of range. Move the handset closer
to this unit.
L {PROGRAM} was pressed. The unit is in
programming mode. To exit, press {PROGRAM}
again. Do not press {PROGRAM}, except when
registering or deregistering the unit.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents