Troubleshooting
Phenomenon
No power is supplied.
HDD access lamps blink.
Thermal error. OPERATE indicator
lights in orange.
Extension HDDs are not recog-
nized.
Specifications
Required Power:
Power Consumption:
Interface:
Operating Temperature:
Dimensions:
Weight:
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
Accessories
Power Cord ...................................................................... 2 pcs.
SCSI Cable ....................................................................... 1 pc.
Rack Mounting Bracket..................................................... 2 pcs.
Bracket Fixing Screw ........................................................ 4 pcs.
2000
© Matsushita Communication Industrial Co., Ltd. All rights reserved.
Cause
Power cord connection is insufficient.
The Inner connector is loosening.
Ventilation openings or fan is blocked.
Cooling fan failed.
Ambient temperature is too low.
SCSI ID setting
Termination
SCSI cable
Power-on sequence
HDD unit position
220 V - 240 V 50 Hz
55 W (inclusive of 4 HDD units if installed)
SCSI-2 (FAST SCSI) Half-pitch 50/pin D-Sub
+5 °C to +45 °C (41 °F to 113 °F)
420 mm (W) x 88 mm (H) x 350 mm (D), rubber feet exclusive
16-9/16" x 3-7/16" x 13-13/16"
WJ-HDE500: 7.3 kg (16 lbs)
WJ-HDE505: 8.0 kg (17.6 lbs)
Matsushita Electric Industrial Co., Ltd.
Central P.O. Box 288, Osaka 530-91, Japan
What to do
Securely plug the cord into AC outlet and AC
inlet..
Securely plug the inner connector.
Remove obstacles.
Consult your dealer for the replacement.
Use the unit within +5 °C to +45 °C.
Set ID number properly.
Set termination properly.
Use the supplied cable & connect it securely.
Turn on peripherals first, then HD500!
Install HDD unit to the right position.
NM1000-0
V8QA5622AN
N 19
Printed in Japan