Removing Washing (Once Programme Is Finished); Delay Start The Programme; Adding Laundry During Wash - Kenwood K10W7D18 Installation Instructions Manual

6. Add detergent into the detergent drawer. The quantity of detergent will depend on the amount of
laundry, the degree of soiling and the water hardness. Use the amount of detergent suggested
on the packaging.
7. Press the Start/Pause button to start the washing.
8. The machine will sound when the programme is complete.
If the door is locked and you switched the machine off and then on - or if there's a power
cut - it will stay locked for 5 seconds.

removing washing (once programme is finished)

Door remains locked for 1 minute after wash stopped.
• Open the machine door and remove your washing.
• Remove any foreign objects to avoid risk of rusting.
• Leave the door and detergent drawer open so that residual water can evaporate.

delay start the programme

1. Select a wash programme.
2. Press the Delay button repeatedly to set the delay hours for the programme to start (0-24 hr).
3. Press the Start/Pause button to confirm and commence the delay function.
To cancel the delay function:
before the programme starts, press the Delay button repeatedly until 0 hr
•
• while the programme is running, press the On/Off button to Off.

adding laundry during wash

You can still add laundry into the unit while it is running a programme. Make sure to follow the
procedures below in order to avoid being scalded by the hot water in the drum.
1. Press the Start/Pause button for 3 seconds.
2. Wait until the drum stops rotating.
3. Wait until the door is unlocked.
4. Open the door carefully, be alert of the hot water in the drum.
5. Add the laundry carefully into the drum and close the door.
6. Press the Start/Pause button to resume the programme.
The machine may not unlock the door for adding laundry when there is too much water or
when the temperature is too high in the drum.
19