Pioneer HTZ-BD52 Operating Instructions Manual page 44

50 Connecting
En
7. When connecting using PBC (Push
Button), on the [ PBC] screen use /
to select NEXT, then press ENTER.
point within 120 seconds.
8. When connecting using PIN confirm
the PIN Code on the [ PIN] screen. Use
cursor / to select NEXT, then press
ENTER.
2
9. Enter into the access point the PIN
Code that you confirmed in step 8
above.
The PIN Code input method differs
depending on the LAN device used. For
details, consult the operating instructions
accompanying your LAN device.
Notes on Network Connection:
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cord of the home
network router or cable modem. Then power
on and/or connect the power cord again.
Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP .
Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided by
our company, and our company is not
responsible for their functionality or
continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
Some internet contents may require a higher
bandwidth connection.
Even if the player is properly connected and
configured, some internet contents may
not operate properly because of internet
congestion, the quality or bandwidth of your
internet service, or problems at the provider
of the content.
Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your broadband Internet connection.
Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the player.
You must use a Router to use xDSL service.