Pioneer HTZ-BD52 Operating Instructions Manual page 71

Setting Options
DRC (Dynamic Range Off
Control)
On
Auto
Speaker Setup Adjust the Trim (output level) and Delay (distance from viewers) of the speakers.
Please see "Adjust speaker settings" for more details (page 80).
Test Tone Output a test tone from the speakers.
Color Space RGB
YCbCr
YCbCr 422
Full RGB
Resolution Auto
480I/576I
480P/576P
720P
1080I
1080P
HDMI Audio Out Bitstream
PCM
Re encode
Off
Control On
Off
HDMI Deep Color 30bits
36bits
Off
HDMI 1080P 24Hz On
Off
HDMI 3D Auto
Off
3D Notice Yes
No
Explanation
Select this to output audio signals without using the DRC function.
Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc. This only affects Dolby TrueHD signals.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
Select this to output the video signals as YCbCr 4:4:4 signals.
Select this to output the video signals as YCbCr 4:2:2 signals.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform
black.
Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
Output the video signals from the HDMI OUT terminal with the selected
resolution.
The resolution can be changed by pressing RESOLUTION, but Auto cannot be
selected.
Select this to output HDMI audio signals directly.
Select this to output HDMI audio signals converted to 2-channel audio
signals.
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Select this when you do not want to output the audio signal from the HDMI
output terminal.
Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 42.
Select this when you do not want to control the player with the remote
control of the connected AV device using an HDMI cable.
Select this when outputting the video signals with 30-bit color.
Select this when outputting the video signals with 36-bit color.
Select this when outputting the video signals with normal 24-bit color.
Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
3D images are not played.
This sets whether or not to display the 3D notice when playing 3D images.
Advanced settings 77
En
8