Automatic Transmission Unit Disassembly - Suzuki Grand Vitara Manual

5A-98 Automatic Transmission/Transaxle:

Automatic Transmission Unit Disassembly

1) Extract torque converter. And remove oil filler tube
and dipstick.
CAUTION
!
Remove torque converter as much straight
as possible. Leaning it may cause damage to
oil seal lip.
1. Torque converter
2. Converter housing
2) Remove input shaft speed sensor (1) and output
shaft speed sensor (2).
3) Remove 6 adapter case fixing bolts and then remove
adaptor case (3) and gasket.
NOTE
Use care not to cause damage to oil seal.
1
4) Remove shift switch (1).
1
www.CarGarage.ir
S5JB0A5106067
1
2
I5JB0A510069-01
2
3
I5JB0A510070-02
I5JB0A510071-01
www.CarGarage.ir
5) Remove C-ring (1) and then remove speed sensor
rotor (2).
NOTE
Use care not to loose rotor stop key.
1
2
6) Remove oil pump (1) by using special tools.
Special tool
(A): 09913–65135
(B): 09927–66520
NOTE
Use care not to cause damage to shaft
bushing surface.
7) Remove bearing at the rear of oil pump (1).
8) Remove O-ring from oil pump (1).
9) Holding input shaft (2) by hand, remove converter
housing (3).
(B)
3
I5JB0A510072-01
(A)
2
1
I5JB0A510073-01