Display Brightness - Miele FNS 37492 iE Operating And Installation Instructions

Selecting additional settings
 By touching the  or  sensors you
can now select the following:
0 : Sensor tone off; Door alarm off
1 : Sensor tone off; Door alarm on
(after 4 minutes)
2: Sensor tone off; Door alarm on
(after 2 minutes)
3 : Sensor tone on; Door alarm on
(after 2 minutes).
 Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and the  symbol will flash.
 Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after ap-
proximately one minute.
28
Display brightness 
You can adjust the brightness of the
display to suit the ambient light condi-
tions in the room.
The display brightness can be adjusted
incrementally from 1 to 3. The factory
default setting is 3 (maximum bright-
ness).
Changing the brightness of the dis-
play
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  sym-
bol flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes in the display.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.