Installing The Cabinet Door - Miele FNS 37492 iE Operating And Installation Instructions

Installing the cabinet door

If installed in a run of units, make sure
that the top edge of the cabinet door
is at the same height as neighboring
unit doors.
The cabinet door must be installed
level, and not under tension.
The next section gives instructions on
how to install a cabinet door that is at
least 5/8" - 3/4" (16 - 19 mm) thick.
 The distance between the appliance
door and the mounting frame is set to
5/16" (8 mm) at the factory. Check
this distance and adjust it if neces-
sary.
 Push the installation aids  to the
height of the cabinet door. The lower
contact edge X of the installation aids
must be at the same height as the
upper edge of the cabinet door to be
installed ( symbol).
Building in the appliance
Tip: Push up the installation aids  to-
gether with the cabinet front until they
are at the same height as the neighbor-
ing unit doors.
 Unscrew the nuts  and remove the
mounting frame  together with the
installation aids .
85