Optional Accessories; Temperature Probe; Data Hold Probe; Accessories Supplied With The Instrument I - Philips PM2517E Service Manual

I
P M 2 5 1 7 E
-
Instruments with serial number Dl\4600 upto Dl\.4900. version /0'1.
Interconnect points 2 and 3 of the power plug.
Note:
Some instruments with serial numbers DM60O upto DMgOj are already equipped with a voltage
regulator diode as shown in figurc 1. For these instuments proceed as for instruments with serial
numbeß greater than DMg00.
-
I n s t r u m e n t s w i t h s e r i a l n u m b e r s g r e a t e r t h a n D M 9 0 0 .
Interconnect points 2 and 3 of the power plug.
Short-circuit the voltage regulator diode.
Note:
The voltage regulator diode is used for decreasing the external g V to 7 V for the instrument.
2. ACCESSORTES
2.1.
Accessories supplied with the Instrument
-
l / e a s u r i n g l e a d s w i t h t e s t p i n s
2 F u s e s 3 1 5 m A q u i c k
I V p o w e r s u p p l y P M 9 2 1 8
D i r e c t i o n s f o r u s e
t o
2 . 2 .
O P T T O N A L A C C E S S O R t E S
2.2.1. Temperature probe PM 9248 (Fig.2)
The resistance thermometer Pl\4 9248 is a contact probe, suitable for measurement of surface temperatures
between -60 oC and +200 oC.
R a n g e
R e s o l u t i o n
Accuracy (combined with
P t \ l 2 5 1 7 )
Perm issible voltage at probe
t i p
-60 oc to +2oo oc
0 . 1 0 c
-
6 0 o C t o + 1 0 0 o C
+ 100 oC to +200 oC
6 0 v
I 1 o/o of reading
+ 1 % t o - 3 % o f r e a d i n g
! 2 0 C
! 2 0 C
2-2.2. Data hold probe pM 9263 (Fig.3)
T h e P M 9 2 6 3 i s a D A T A H O L D p r o b e w h i c h c a n b e u s e d i n c o m b i n a t i o n w i t h m u l t i m e t e r s w h i c h h a v e a
data hold facilities on the s'pole DIN probe input. A switch ring on the probe is pushed forward to hold the
data for display. Depending on the multimeter, voltage, resistance and current measurements can be made in
combination with the probe.