ABB COM600 Owner's/Operator's Manual page 14

COM600 3.3
14
Station Automation COM600
Operator's Manual
You can see the status of the IEDs in the substation structure. If there is a problem in
communication, there is a red cross next to the IED.
Figure 3.5.1-1 The substation view to HMI
Alarm and event information
By clicking the voltage level and bay objects, you can access their specific alarm lists.
To look at a list of events, click View Events above the Persisting Alarms list.
IED information
By clicking the IED objects you can view their communication status and information
on diagnostic counters. Below each IED in the substation structure you can click Dis-
turbances, Parameters or Measurements to access the corresponding data.
It depends on the IED configuration, whether Disturbances,
Parameters or Measurements are shown in the substation
structure.
1MRS756705
substation_view.jpg