Table of Contents
Advertisement
Using the timeshift function
manually
You can pause a Live TV broadcast, then
continue watching the programme at a
later time. This is useful when you receive an
unexpected call or visitor while watching TV.
The Following are operating steps when the
[Permanent Timeshift] option is set to [Off ].
1. Press TIME SHIFT while watching a TV
broadcast. The picture pauses, and the
recorder starts recording the current TV
programme to the HDD.
2. Press
to resume watching the prgramme.
B
Press INFO/DISPLAY ( ) to display the
progress of timeshift.
Press . / > to move the starting
point or the ending point of timeshift.
Press m / M to playback of timeshift
fast forward or fast reverse.
Press M while in pause mode to slow
down the timeshift playback speed. Press
M repeatedly to change the playback
speed.
3. Press x to cancel the timeshift.
Timeshift cannot be saved as a recorded
title.
Using the permanent timeshift
If you set the [Permanent Timeshift] option
to [On], live TV broadcast will automatically
be recorded to the HDD without pressing
TIME SHIFT button. The timeshift will start
automatically when the Digital TV tuner mode
is started.
Refer to "Setting the permanent Timeshift"
on page 32 to set the [Permanent Timeshift]
option.
1. Press 1 (POWER) to turn on the unit.
2. Use U / u / I / i to select [DTV] and press
ENTER ( ).
The timeshift function will automatically
start.
Press . / > to move the starting
point or the ending point of timeshift.
Press m / M to playback of timeshift
fast forward or fast reverse.
Press M while in pause mode to slow
down the timeshift playback speed.
Press M repeatedly to change the
playback speed.
3. Press HOME to exit from the DTV viewing.
Operation
45
4
Advertisement
Table of Contents
