Toshiba Strata CIX User Manual page 29

Note If your CIX telephone system is networked to another CIX system (using R1.2
or later software), you can see BLF/DSS information for all users. When using
versions prior to CIX 1.2, vacant stations and pilot numbers on a remote
networked system appear in DND status. With R1.2 and higher, these stations
will appear idle on the BLF.
ä
To make a consultation transfer from the BLF/DSS tab
1. With a connected call, click on the destination party. Your console shows
"Announce" and you can announce the call.
2. Press Transfer (Enter) on the keyboard to send the call to the destination party.
ä
To perform a blind transfer from the BLF/DSS tab
ä
With a connected call, double-click on the destination party. The call immediately
leaves the console and calls the destination.
Note You can customize the order of the names from the User Directory. See
Chapter 3 – User Directory
Number of BLF tabs
The number of BLF tabs that appear on your screen varies according to the display
setting on your PC (see below):
Display Setting
600 x 800
1024 x 768
1152 x 864
Strata CIX Attendant Console
for more details.
Maximum Number of BLF Tabs
12/06
Call Processing
3
5
7
Making a Call
17