GE ADTS542F User Manual page 51

ADTS542F/552F/553F/554F User Manual
Delete limits
When selected, this function requires you to enter a PIN code. To delete limits:
1. Touch "Delete limits", a numbered keypad is displayed.
2. Enter your PIN number and touch the "tick" icon. The Delete limits panel opens. Touching the
"cross" icon closes the numbered keypad without making any change.
3. On the Delete limits panel, touch the panel for the custom limits to be deleted (User 1 to 5).
4. The message "Are you sure you want to delete this Limits Set?" is displayed.
5. Touch "Yes". The previously selected User 1 to 5 limits panel is deleted. Touching "No" returns
you to the Delete limits panel without making any changes.
6. If required, repeat this procedure to delete other limit sets (User 1 to 5).
7. If required, you can now create new Limit sets to replace deleted limit sets, see "Create new
limits" above.
8. Touch the Back/Return button to return to the ADTS Settings menu.
• Auto zero (only in measure mode): when auto zero is On (default), the Pt and Ps sensors are
automatically aligned using the Ps channel as the reference channel.
To turn auto zero On and Off:
1. Touch the auto zero panel inside the white box. When auto zero is On, a "tick" appears inside
the box. If no "tick" is visible, auto zero is Off.
• Change supervisor PIN: when selected, this function allows you to enter a new PIN code. To change
your PIN:
1. Touch the "Change supervisor PIN" panel. A numbered keypad opens and the text "Enter
Supervisor Pin" is displayed.
2. Enter your current PIN. The text "New PIN" is displayed. Touching the "Cross" icon cancels the
action and closes the numbered keypad without changing the PIN.
3. Enter the new PIN number and touch the "tick" icon. You will be asked to confirm the change.
4. Enter the new PIN again and touch the "tick" icon again. The numbered keypad closes and the
new PIN is now active.
5. You will be prompted to remember the new PIN.
6. Touch "OK". The new PIN is now active and the "Change supervisor PIN" panel closes.
Regional settings
Opens a sub-menu containing four items:
• Date: to change the date setting:
1. Touch the date panel. The current setting is displayed.
2. On the displayed calender, select the required "Day", "Month" and "Year".
3. Touch the "Tick" icon, the calender closes and the new date is displayed in the date panel.
4. Touching the "Cross" icon cancels the action and closes the calender.
Date format: shows the current format. To change the date format:
1. Touch the date format panel.
2. Touch the required date format radio button. The date format radio button panel closes and
the date format panel shows the selected format.
• Time: to change the time setting:
1. Touch the time panel. The current setting is displayed.
2. On the displayed panel, select the required "hours", "minutes" and "seconds".
3. Touch the "Tick" icon, the time panel closes and the new time is displayed in the time panel.
K0553 Revision C
3-17