Mounting Bracket Options And Accessories - Bosch MIC IP fusion 9000i Installation Manual

MIC IP fusion 9000i
7.3

Mounting Bracket Options and Accessories

Bosch sells a complete series of mounting brackets that support multiple mounting
configurations.
You can install the camera:
–
–
MIC-9K-IP67-5PK (Connector kit for MIC IP fusion 9000i cameras)
Refer to the manual provided with the kit for installation instructions.
Notice!
Observe all appropriate safety precautions and local building regulations.
The most common type of mounting location is the top of a pole suitable to support CCTV
equipment and that provides a robust mounting platform to minimize camera motion and
typically has a large base cabinet for mounting ancillary equipment such as power supplies.
Other locations for mounting the camera include the top of a building, the side (wall) of a
building, the corner of a building, and under the eave of a building.
Refer to the MIC Series Mounting Brackets Installation Guide for complete installation
instructions.
Deep Conduit Adapter
The hinged DCA is well-suited to installations on top of a pole.
Pole Mount
The camera can also be mounted on the side of a lamp post, pole, or similar column using the
Pole Mount Bracket (MIC-PMB). Be aware that lamp posts can often be subject to movement
and are not suitable platforms in all conditions or for all applications.
The figure below identifies the three mounting accessories (each sold separately) that are
necessary to mount the MIC camera on the side of a pole.
Note: The figure identifies the part numbers, as well as the codes for the available colors (-BD
for black, -WD for white, and -MG for grey) of each mounting accessory.
Bosch Security Systems
onto a MIC-DCA or a MIC wall mount
or
directly to a mounting surface using the supplied base gasket and the appropriate
connector kit (sold separately):
Typical hinged DCA mount configuration
Installation Manual
Mounting | en 19
2018.09 | 1.1 | F.01U.334.820