Supported Kernel; Os Installation; Precautions For Os Installation On Lpar Manager - Hitachi Compute Blade 2500 series, Compute Blade 500 series Installation Manual

Supported Kernel

The following table shows supported kernel.
Red Hat Enterprise Linux 6.5
Red Hat Enterprise Linux 6.6
Note:
1 Supported kernels are security update kernels.
.
Servers that are purchased from HDS or its distribution partners may support
a subset of these OS releases. To know which specific 6.x versions are
supported, contact your server vendor's sales or support organizations.
When using RHEL 6 on an LPAR, see 13. Updating kernel in
installation on LPAR on page
For how to install drivers for Emulex devices, see Hitachi Compute Blade
Emulex Adapter User's Guide for Driver.

OS Installation

This section describes how to install Red Hat Enterprise Linux 6 with the
Driver & Utility CD.
Tip:
• The installation procedure described in this guide is an example. See the
following Red Hat website for more details.
https://access.redhat.com/documentation/en-US/
Red_Hat_Enterprise_Linux/
• Driver & Utility CD for RHEL 6, version 0650-xx, contains drivers and
utilities for RHEL 6.5. It can be used for RHEL 6.5 setup.

Precautions for OS installation on LPAR manager

Be aware of the following precautions for LPAR manager environment.
Activating, resetting the LPAR
To activate or reset the LPAR, perform them through the LPAR manager
management screen. Do not use the power button or the reset button for the
operation. Also, do not use the dump command from the management
module. It is because such operations are performed on the server blade, not
on the LPAR; pressing the server blade buttons affect the server blade, and
can damage the OS.
2-2
Hitachi Compute Blade Series OS Installation Guide for Red Hat Enterprise Linux
Table 2-1 Supported kernel
Supported OS
2-19.
Red Hat Enterprise Linux 6
Supported kernel
32-bit x86
1
2.6.32-431.20.3.el6
2.6.32-504.el6
64-bit x86_64
Setting up after