Hitachi Compute Blade 2500 series, Compute Blade 500 series Installation Manual page 28

Note: Do not install the "freeipmi-bmc-watchdog" package. If this package is
installed to RHEL 6, the system will auto restart periodically.
System Management > System Management > Optional packages >
freeipmi-bmc-watchdog-x.x.x-x.xx.xx
For CB 520X server blade, CB 520H B3 server blade, do not install tboot
package (tboot-x.xx-x.el6.x86_64.rpm/ tboot-x.xx-x.el6.i686.rpm). Click
Base System > Base to show the Packages in Base dialog box, and make
sure that tboot package is unchecked.
Tip: When a message "Please select the nearest city in your time zone" is
displayed, select a time zone, uncheck "System clock uses UTC", and click
Next.
Note: For CB 2000, do not configure network settings for a device using the
e1000e driver* which requires to be disabled after the installation.
*: Intel Corporation 82567LF-2
The device with the last one of the three consecutive MAC addresses.
Note: For CB 2000, the device on this system does not support [FCoE
Storage Client]. Do not check [FCoE Storage Client] on the following
window in installation. If you continue to install the OS with [FCoE Storage
Client] checked, the installation may not be completed.
2-8
Red Hat Enterprise Linux 6
Hitachi Compute Blade Series OS Installation Guide for Red Hat Enterprise Linux