Class Of Service Options (Outgoing Call Service) - NEC UNIVERGE SV8100 Configuration Manual

Issue 1.0
3.10
18
10-36-02 : SIP Trunk Registration Information Setup – User ID
Per registration ID 1~31 you can assign what will be populated in the "SIP from
Address" field.
15-16-01 : SIP Register ID Setup for Extension – Register ID
Per station you can choose a SIP register ID of 1~31. If left blank the "SIP from
Address" would not be assigned on a per station basis. If assigned, it will look at
Program 10-36-02 to populate the "SIP from Address" field. This takes priority
over command 14-12-01.

Class of Service Options (Outgoing Call Service)

Figure 12 Class of Service Options (Outgoing Call Service)
20-08-13 : Class of Service Options (Outgoing Call Service) – ISDN Clip
This needs to be turned ON per COS, if you are trying to send any information on
a per station basis. If turned OFF, it will still send the trunk information if set.
SIP Trunking Service Configuration Guide
Windstream