Operation; General Information; Operating Sitrans Lr400 - Siemens Sitrans LR400 Instruction Manual

Operation

General Information

You can operate SITRANS LR400 with:
• Handheld infrared programmer
• Handheld HART Communicator
• PC/Laptop and SIMATIC PDM software via HART or PROFIBUS PA
Notes:
• SITRANS LR400 can be operated and programmed easily with SIMATIC
PDM software. This software gives you the added possibility of saving and
archiving your application-specific parameters and copying them back into
the device if necessary.
• It is best to perform the operations described in the following sections
directly on the device to familiarize yourself with the operation.

Operating SITRANS LR400

Use the arrow keys at the bottom of the hand programmer to program SITRANS LR400.
The two-line LCD displays the parameters. You can alter the setting or change to other
parameters using the arrows on the hand programmer (see page 22 for information on
navigating the menus using the arrow keys).
Hand Programmer
Note: The ARROW buttons shown below are required for programming
this product. The additional buttons on the hand programmer do not
apply to SITRANS LR400.
SITRANS LR400
buttons
Page 20 SITRANS LR400 (7ML5421) – INSTRUCTION MANUAL
C
Key Programming Mode
Parameter scroll UP
Parameter scroll DOWN
LEFT Arrow (or CANCEL)
RIGHT Arrow (or ENTER)
7ML19985FH06