Advertisement
1
- How to remove the CD Core Unit
1. Apply Shorting Solder to the flexible cable of
the Pickup, and disconnect it from the
connector.
A
2. Unsolder the four leads, and loosen the
Screw.
3. Remove the CD Core Unit.
Caution: When assembling the CD Core Unit,
assemble it with the SW in a clamped state
so as not to damage it.
B
- How to remove the Roller Arm Assy
1. Remove the Guide Arm Assy.
2. Remove the CD Core Unit. (If the Spring can be removed, the unit need not be removed, depending on the type of CD
Core Unit.)
3. Remove the Spring.
C
4. Slide the Roller Arm Assy to the left.
D
Spring
E
F
24
1
2
Roller Arm Assy
2
3
Shorting Solder
Screw
CD Core Unit
Solder
Spring
CX-3195
3
4
4
Advertisement
