Pioneer CX-3195 Service Manual page 27

5
- How to remove the Clamp Arm Assy
1. Make the system in the carriage mechanism mode, and set the mechanism to the eject mode.
2. Remove the three Springs.
3. While pressing the position A, turn the Clamp Arm Assy upward, slide it to the left, and remove.
Caution: When assembling, place the boss of the Detection Pin in the cam unit of the Loading Rack.
- How to remove the Spindle Motor Assy
1.Make the system in the carriage mechanism
mode, and have it clamped.
2.Remove the CD Core Unit and remove the leads
from the Inner Holder.
3.Set the mechanism to the eject mode and remove
the Clamp Arm Assy.
4.Set the mechanism to the clamped and move the
Pickup to circumference.
5.Remove the two Screws, and remove the Spindle
Motor Assy.
5
6
Spring
Clamp Arm Assy
Detection Pin
6
7
Spring
A
Spring
Screw
CX-3195
7
8
place the boss
in the cam
Detection Pin
Spindle Motor Assy
27
8
A
B
C
D
E
F