4
Disassembly/Assembly > Document Exposure, Feed System > Removing the ADF Pickup Roller > Procedure
CAUTION:
• When installing, match the spring [1] of the ADF Roller Unit to the boss [2].
[2]
• Be sure to put the Sensor Flag [1] above the ADF Roller Unit [2] at installation work.
[1]
[2]
4
Disassembly/Assembly > Document Exposure, Feed System > Removing the ADF Pickup Roller > Procedure
[1]
F-4-67
[1]
[2]
F-4-68
Removing the ADF Pickup Roller
■ Preparation
1) Remove the ADF Roller Unit. Refer to page 4-38.
■ Procedure
CAUTION:
Do not touch the surface of the roller.
1) Insert the end of the flat-blade screwdriver into the [A] part to remove the ADF Pickup
Roller Unit [1].
2) Remove the ADF Pickup Roller [1].
[1]
4-40
[1]
[A]
F-4-69
F-4-70
4-40