Magne 4X Dyn - ABB Magne 3 Series User Instructions

Magne 4X DYN

Important! Shielded cable is necessary between the unit and the rest of the safety loop.
Important! Several Magne 4X DYN can be locked with a M12-3S, but then no information will be sent back.
2TLC172315M0201, rev. K
Monday, May 07, 2018 10:51:13 AM
M12 5 pole male
connector seen from
the cable side.
M12 5-pole connector:
1 ) Brown: +24 VDC
2 ) White: Dynamic signal in
3 ) Blue: 0 V
4 ) Black: Dynamic signal out
5 ) Gray: Locking signal +24VDC
7
M12 5 pole female
connector seen from
the cable side.
www.abb.com/jokabsafety