ABB A175-M62 Operation Manual page 55

Operation Manual / 4 Product description / A100-M axial
4 Monitoring during operation / 4.2 Turbocharger speed
4.2.4 Replacing the speed sensor
NOTICE
Sealing of the speed sensor
The speed sensor is designed with a sealing lip and does not require any ad-
ditional gasket for assembly.
Connect cable connector (86515) with the speed sensor (86505).
u
Switch on lubricating oil supply to the turbocharger.
u
4.2.5 Malfunction of the speed measurement system
The possible reasons for malfunction of the speed measurement system are described in
chapter Troubleshooting (Reasons for malfunction of the speed sensor).
© Copyright 2017 ABB. All rights reserved. HZTL4033_DE Revision B December 2017