Mitsubishi Electric AG-150A Instruction Book page 69

(2) Changing the floor level name or floor name
(3) Loading floor layout
Layout files must be saved in the specific name and size in a route folder in USB memory in order to be loaded. Loadable file size is
1890 width × 660 height in gif for each floor.

Note: Use a USB memory that supports USB 1.1 standards.
Some security-enhanced USB memories cannot be used.
The following USB memories are checked for proper operation. (As of Oct. 2009)
a: Manufacturer: Sandisk
b: Manufacturer: Kingston
c: Manufacturer: I-O DATA
d: Manufacturer: I-O DATA
e: Manufacturer: BUFFALO
f: Manufacturer: BUFFALO
g: Manufacturer: BUFFALO
h: Manufacturer: BUFFALO
i: Manufacturer: adata
(* or ** in the models of c through h indicates color. )
The following is the file name for each floor.
Note: [Floor] shown below is not the actual floor name, but the floor number counted from the bottom on the floor layout window.
ex. Even if the floor name is set to [15F], the file name is [floor_01.gif] when the floor is the first floor in the setting.
File display range varies depending on the floor layout setting.
Floor layout
width 1 × height 1
width 2 × height 1
width 3 × height 1
Model: SDCZ6-2048-J65RB
Model: DT400/2GBFE
Model: TB-BH2/2G/*
Model: TB-BH2/4G/*
Model: RUF-C2GS-**/U2
Model: RUF2-C2GS-**/M
Model: RUF-C4GS-**/U2
Model: RUF-C8GS-**/U2
Model: C702
Floor File name
1 floor_01.gif
2 floor_02.gif
3 floor_03.gif
4 floor_04.gif
5 floor_05.gif
Display range
630 width × 330 height
1260 width × 330 height
1890 width × 330 height
Press the floor name button on the basic floor setting window, and
enter the floor name in three characters or less.
Press the floor name button and enter the floor name in 20 characters
or less.
Layout files (256 colors in gif) is loaded from USB memory when
"Load from USB Memory" button is pressed in the basic floor setting
window.
Capacity: 2G
Capacity: 2G
Capacity: 2G
Capacity: 4G
Capacity: 2G
Capacity: 2G
Capacity: 4G
Capacity: 8G
Capacity: 2G
Floor File name
6 floor_06.gif
7 floor_07.gif
8 floor_08.gif
9 floor_09.gif
10 floor_10.gif
Floor layout
width 1 × height 2
width 2 × height 2
width 3 × height 2
– 68 –
* Use FAT32 or FAT16
to format a USB
memory if necessary.
Display range
630 width × 660 height
1260 width × 660 height
1890 width × 660 height