Reading Setting Data From Usb Memory - Mitsubishi Electric AG-150A Instruction Book

10-2 Reading setting data from USB memory

To read setting data from USB memory, insert USB to USB port. Touch [Maintenance] on setting change and then touch [Data Utility] tab
to show the window below.
First, create [SetupData] folder in the root folder of the USB memory using PC. Save the setting data in the [SetupData] folder.
Note: Do not change the file name from that of when backup was performed.
Note: If the folder name or file name is different from the given name, no data can be read.
Note: Check that normal communication between the AG-150A and expansion controller is established before reading in data from the
USB drive.
Note: If the data is not read, check the folder name and the file name.
Note: If the data is not read, check if the USB memory is inserted correctly.
Note: Do not read the data that was saved from the expansion controller or GB-50AD.

Note: Use a USB memory that supports USB 1.1 standards.
Some security-enhanced USB memories cannot be used.
The following USB memories are checked for proper operation. (As of Oct. 2009)
a: Manufacturer: Sandisk
b: Manufacturer: Kingston
c: Manufacturer: I-O DATA
d: Manufacturer: I-O DATA
e: Manufacturer: BUFFALO
f: Manufacturer: BUFFALO
g: Manufacturer: BUFFALO
h: Manufacturer: BUFFALO
i: Manufacturer: adata
(* or ** in the models of c through h indicates color. )
Read from USB memory
button
After saving the setting file in the [SetupData] folder, touch [Initial
Setting] or [User Info], and then touch [Read from USB Memory]
button.
Wait for a while. The message "The data has been read" will be
shown when the reading is completed. Check if the selected data was
read correctly.
Model: SDCZ6-2048-J65RB
Model: DT400/2GBFE
Model: TB-BH2/2G/*
Model: TB-BH2/4G/*
Model: RUF-C2GS-**/U2
Model: RUF2-C2GS-**/M
Model: RUF-C4GS-**/U2
Model: RUF-C8GS-**/U2
Model: C702
– 86 –
Capacity: 2G
Capacity: 2G
Capacity: 2G
Capacity: 4G
Capacity: 2G
Capacity: 2G
* Use FAT32 or FAT16
Capacity: 4G
to format a USB
Capacity: 8G
memory if necessary.
Capacity: 2G