Alignment Led; Figure 6 Alignment Led - ABB MicrOS 410 Installation Manual

Table 8
State
Flashing
On

Alignment LED

The MicrOS 410 has an alignment LED on the back of the unit. This LED helps the installer
optimally aim the MicrOS 410 at the Wi-Fi router to which it will communicate. The MicrOS
410 directional antenna has a 3dB beam width of 30
range makes the unit easy to align. The alignment LED is useful in getting maximum
performance.
Figure 6
The MicrOS 412 must first associate with a router before the alignment LED can be used. Use
the following procedure to properly align the MicrOS 410:
1. Install the MicrOS 410 and aim it in the general direction of the router you want it to
associate to.
Move the MicrOS 410, if necessary, until it associates with the router. See
2.
Status LED must be solid green).
MicrOS 410 Installation Guide
LED Indicator States
Description
The unit has power but is not ready. It may be in the process of associating with
the network or it may not be able to associate with a network.
The unit is associated with the network and operating properly.
Alignment LED
o
and a 6dB beam width of 35
Alignment LED
Chapter 2
o
. This wide
Table 8 (the
25