Service Settings; A Setting The Save Setup To A Usb; B Setting The Load Setup From A Usb; C Displays The Hard Disk Information - Sanyo DSR-2108 Instruction Manual

SERVICE settings

Press the MENU button and input the ADMIN password.
The MAIN MENU is displayed, select "SERVICE" using the
control button ({|}~).
MAIN MENU
LIVE
NETWORK
SERVICE
SAVE SETUP TO A USB
LOAD SETUP FROM A USB
DISK INFO
USB memory
49
RECORD SYSTEM
HDD SET SERVICE
A
Setting the SAVE SETUP TO A USB
Saving the menu settings of this unit to a device, such as a
USB memory.
1
Connect the USB memory to the USB terminal.
2
Select "SAVE SETUP TO A USB" using the control
button ({|) and press the ENTER button.
The confirmation screen is displayed.
3
Select "CONFIRM" using the control button (}~)
and press the ENTER button.
The message "SAVING" is displayed and saving starts.
Once saving is complete the SERVICE screen is
displayed.
B
Setting the LOAD SETUP FROM A USB
Allows to call up the menu settings of this unit saved on such
a device as USB memory onto this unit or onto a device of
identical model.
1
Connecting the USB memory containing the menu
settings to the USB terminal.
2
Select "LOAD SETUP FROM A USB" using the
control button ({|) and press the ENTER button.
The confirmation screen is displayed.
3
Select "CONFIRM" using the control button (}~)
and press the ENTER button.
The message "LOADING" is displayed and loading
starts. Once loading is complete, the unit restarts and
returns to live videos.
C
Displays the hard disk information
Select "DISK INFO" using the control button ({|) and
press the ENTER button.
The following data is displayed on the DISK INFO screen.
• Total capacity of the hard disk
• Remaining capacity of the hard disk
• Date and time of first recording
• Date and time of last recording
DISK INFO
hda size = 500GB remain=375GB
hda start time:2009.04.18.15:00:00
hda last time:2009.04.24.18:28:45