Rj71Gf11-T2 - Mitsubishi Electric MELSEC iQ-R Series User Manual

1.4

RJ71GF11-T2

This section describes the names of each part of the RJ71GF11-T2.
(1)
(2)
(3)
(4)
(5)
No. Name
(1) RUN LED
*1
ERR LED
MST LED
*1
D LINK LED
SD/RD LED
*1
L ERR LED
(2) Dot matrix LED
(3) Ethernet port (P1)
L ER LED
LINK LED
(4) Ethernet port (P2)
L ER LED
LINK LED
1 PART NAMES
28
1.4 RJ71GF11-T2
Description
Indicates the operating status.
On: Normal operation
Off: Error ( MELSEC iQ-R CC-Link IE Field Network User's Manual (Application))
Indicates the error status of the module.
On: Error or at error detection on all stations ( MELSEC iQ-R CC-Link IE Field Network User's Manual
(Application))
Flashing (500ms interval): A data link faulty station was detected.
Flashing (200ms interval): Error ( MELSEC iQ-R CC-Link IE Field Network User's Manual (Application))
Off: Normal operation
Indicates the operating status.
On: Operating as a master station
Flashing: Operating as a submaster station
Off: Operating as a local station
Indicates the data link status.
On: Data link (cyclic transmission being performed)
Flashing: Data link (cyclic transmission stopped)
Off: Data link not performed (disconnection)
Indicates the data sending/receiving status.
On: Data being sent or received
Off: Data not sent nor received
Indicates the receive data and line error status. When the L ERR. LED is on, the port in which the error was
detected can be checked with the L ER LED of P1 or P2.
On: Abnormal data received or loopback being performed
Off: Normal data received and loopback not performed
Displays the station number set in the module and the module communication test result.
Station number not set: "  "
Master station: 0
Submaster station, local station: 1 to 120
In offline mode: ""
For display of the module communication test result, refer to the following.
( MELSEC iQ-R CC-Link IE Field Network User's Manual (Application))
PORT1 connector for CC-Link IE Field Network Connect an Ethernet cable.
For wiring methods and wiring precautions, refer to the following.
( Page 67 Wiring of CC-Link IE Field Network)
Indicates the port status.
On: Abnormal data received or loopback being performed
Off: Normal data received and loopback not performed
Indicates the link status.
On: Link-up
Off: Link-down
PORT2 connector for CC-Link IE Field Network Connect an Ethernet cable.
For wiring methods and wiring precautions, refer to the following.
( Page 67 Wiring of CC-Link IE Field Network)
Same as the P1 connector