Lens Installation - Sanyo PLC-XP200L Owner's Manual

Lens Installation

When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the
sales dealer for detailed information of the optional lens specifications.
Removing the lens
1
Shift the lens to the center position by using the
Lens shift function (p. 30).
2
Turn off the projector and unplug the AC power
cord.
3
While pressing the top cover release button on
the top cover, slide the top cover toward front to
remove it.
4
Slide the light-block sheet upward and remove it.
5
Hold the lens with one hand and pull the Lens
Lock Lever upward with the other hand. Remove
the lens from the projector.
✽Do not touch the glass part of the lens with your
hand.
CAUTION
Be careful when handling the lens. Do not
drop.
Top cover release button
Top cover
Light-block sheet
Installation
19