Sanyo PLC-XP200L Owner's Manual page 20

Installation
Attaching the lens to the projector
1 Turn off the projector and unplug the AC power
cord.
2
Fit the lens to the projector. Make sure that the
lens is fully inserted to the projector.
3 Push the Lens Lock Lever downward. Make sure
that the lens is properly locked.
4
Slide the light-block sheet in the groove to mount.
5
While pressing the top cover release button on the
top cover, slide the top cover back to the projector.
● Do not touch or remove any parts except the lens and related parts. It may result in
malfunctions, electrical shock, fire hazard or other accidents.
● Before installing or replacing the lens, check that the Model No. of the Projection Lens
matches to the projector.
● For details of the lens and installation, contact the sales dealer where you purchased the
20
NOTES ON LENS INSTALLATION
projector.
Groove