Remote Room Combine - Philips Lytemode 2-Button Remote Station User Manual

Remote ROOM COMBINE

When used with an ILS-CL-RCGP or ILS-
CL8-RSPS Room Combine Panel, the unit can
be programmed to control the combining of
two rooms. The top (OPEN) button will send
the room combine command, while the bottom
(CLOSE) button will send the room un-
combine command. The top button LED will
illuminate when Room Partition has combined
the two rooms. The bottom button LED will
illuminate when Room Partition has un-
combined the two rooms.
To program:
Step 1. Press and hold TOP and BOTTOM buttons for 10
seconds. (Both LEDs will start to blink.)
Step 2. At the ILS-CLRCGP or ILS-CL8-RSPS, press a Room
Combine Partition Switch button.
Step 3. At the 2-Button Room Combine Remote Station, press
TOP button to accept or press BOTTOM button to
abort.
Only one partition can be programmed.
Note:
2-Button Remote Station User's Guide
OPEN
CLOSE
9